Skip to main content
WhatSSDFits.com
Every Device. Every Interface. Every Era.
HP logo

SSD for HP ProLiant DL180 Gen10 Plus (DL180 Gen10+)

2021–2022

Form Factor: 3.5-inch SASInterface: SAS 12GbMax Capacity: 15.36TB
Upgradeable

Quick answer

The HP ProLiant DL180 Gen10 Plus (DL180 Gen10+) is matched with Seagate Nytro 3331 1.92TB, WD Gold 2TB Enterprise, Seagate Nytro 3350 3.84TB, WD Gold 12TB HDD, WD Gold 4TB Enterprise, WD Gold 8TB Enterprise, Seagate Nytro 3732 1.92TB. Compatible storage type: 3.5-inch SAS SAS 12Gb. Capacity guidance: up to 15.36TB. Before buying, confirm your exact model number, storage interface, physical size, and connector/keying. Listings are from eBay and Amazon and may change.

Compatible SSDs for the HP ProLiant DL180 Gen10 Plus

  • Seagate Nytro 3331 1.92TB

    (XS1920SE70014)
    2.5-inch SASSAS 12GbRead 1100 MB/sWrite 1000 MB/s1.92TB
    HIGH

  • WD Gold 2TB Enterprise

    (WD2005FYYZ)
    3.5-inch SATASATA IIIRead 250 MB/sWrite 250 MB/s2TB
    HIGH

  • Seagate Nytro 3350 3.84TB

    (XS3840SE70114)
    2.5-inch SASSAS 12GbRead 2150 MB/sWrite 2100 MB/s3.84TB
    HIGH

    Seagate Nytro 3350 3.84TB2 listings

    $990.00Newebay
    $1190.00Usedebay

  • WD Gold 4TB Enterprise

    (WD4003FRYZ)
    3.5-inch SATASATA IIIRead 255 MB/sWrite 255 MB/s4TB
    HIGH

  • WD Gold 8TB Enterprise

    (WD8004FRYZ)
    3.5-inch SATASATA IIIRead 272 MB/sWrite 272 MB/s8TB
    HIGH

  • Seagate Nytro 3732 1.92TB

    (XS1920SE70044)
    3.5-inch SASSAS 12GbRead 1100 MB/sWrite 1000 MB/s1.92TB
    HIGH

Listings and prices are pulled from eBay and Amazon and may change. Always verify compatibility — confirm your exact model number, storage interface, physical size, and connector/keying — before purchase. Last checked September 16, 2026.

SSD Upgrade Guide for the HP ProLiant DL180 Gen10 Plus

This device uses a 3.5-inch SAS drive with a SAS 12Gb interface. Maximum supported capacity is 15.36TB.

Check the form factor and interface above to choose a compatible drive.

Always power off your device and disconnect power before replacing storage.

Frequently Asked Questions

What SSD fits the HP ProLiant DL180 Gen10 Plus (DL180 Gen10+)?

The HP ProLiant DL180 Gen10 Plus (DL180 Gen10+) is matched with Seagate Nytro 3331 1.92TB, WD Gold 2TB Enterprise, Seagate Nytro 3350 3.84TB, WD Gold 12TB HDD, WD Gold 4TB Enterprise, WD Gold 8TB Enterprise, Seagate Nytro 3732 1.92TB. It supports 3.5-inch SAS SAS 12Gb. This device supports up to 15.36TB based on our records. Before buying, confirm your exact model number, storage interface, physical size, and connector/keying.

How do I verify SSD compatibility?

Verify your full model number against the device page, then confirm the physical form factor (3.5-inch SAS), interface (SAS 12Gb), and M.2 keying if applicable. Compare against your existing drive or manufacturer specs before purchase.

Can I use NVMe if my device originally had SATA?

Interface support varies by exact model. Our records indicate 3.5-inch SAS SAS 12Gb. Confirm whether your slot supports SATA, NVMe, or both before choosing a drive.

Does physical size and keying matter?

Yes. M.2 drives vary by length (e.g. 2280) and keying (B-key, M-key, B+M). 2.5-inch and other form factors must match the bay or adapter your device accepts. The HP ProLiant DL180 Gen10 Plus (DL180 Gen10+) is documented as 3.5-inch SAS SAS 12Gb — a drive with the wrong size or key will not fit or work.

Are these listings live and current?

Listings and prices are pulled from eBay and Amazon and may change at any time. We refresh marketplace data regularly, but always verify the listing title, condition, and seller before purchase.